Inconel 718

Inconel 718 is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately 1400°F (760°C) and oxidation resistance to approximately 1800°F (982°C). In addition, the alloy exhibits excellent tensile and impact strength even at cryogenic temperatures. 

Inconel 718 is widely used for static and rotating components in stationary gas turbines, rocket drives and spacecraft, motor vehicle turbo chargers, high-strength screws, springs and mounting elements, and for heat-resistant tools in forgeries, extruders and separating shearers.

Chemical Composition (%)

Grade Ni Cr Fe Mo Nb Co Mn
Inconel 718 50 Min 17.0~21.0 balance 2.0~13.3 4.75~5.5 1.0 Max 0.35 Max
S Si C Ti Al Cu    
0.015 Max 0.35 Max 0.08 Max 0.65~1.15 0.2~0.8 0.3 Max    

Mechanical Properties

Grade Yield Strength 
0.2% Offset
Tensile Strength Elongation
in 2 inches
Hardness
KSI MPa KSI MPa % HB
Inconel 718 105 Max 725 Max 150 Max 1035 Max 30 Min 363 Max

Quken offers Inconel 718 products in the following forms:

Inconel 718 Products Standard Size Available (mm)  
Inconel 718 Sheets ASME SB670 0.5~2*2~350*C Inquiry
Inconel 718 Plates ASME SB670 2~25*1000~1500*2000~6000 Inquiry
Inconel 718 Bars ASME SB637 φ3~200*100~6000  Inquiry
Inconel 718 Wires ASME SB637 φ0.01~3*C Inquiry